Search results for " supports"

showing 10 items of 12 documents

Design of enzyme-mediated controlled release systems based on silica mesoporous supports capped with ester-glycol groups

2012

[EN] An ethylene glycol-capped hybrid material for the controlled release of molecules in the presence of esterase enzyme has been prepared. The final organic-inorganic hybrid solid S1 was synthesized by a two-step procedure. In the first step, the pores of an inorganic MCM-41 support (in the form of nanoparticles) were loaded with [Ru(bipy) 3]Cl 2 complex, and then, in the second step, the pore outlets were functionalized with ester glycol moieties that acted as molecular caps. In the absence of an enzyme, release of the complex from aqueous suspensions of S1 at pH 8.0 is inhibited due to the steric hindrance imposed by the bulky ester glycol moieties. Upon addition of esterase enzyme, del…

Cell viabilityINGENIERIA DE LA CONSTRUCCIONEthyleneRuthenium complexesMCM-41 supportsCytotoxicityGlycol derivativesEsteraseFunctionalizedOrganic-inorganic hybrid solidsGlycolschemistry.chemical_compoundQUIMICA ORGANICATumor Cells CulturedElectrochemistryControlled release systemsOrganic chemistryControlled releaseGeneral Materials ScienceSteric hindrancesMCF-7 cellsSpectroscopyHydrolysisEsterasesSilicaEstersSurfaces and InterfacesSilicon DioxideCondensed Matter PhysicsControlled releaseChlorine compoundsEster bondsBody fluidsHybrid materialsHybrid materialPorosityCell deathCell SurvivalSurface PropertiesCytotoxic drugsRutheniumHydrolysisEnzymatic hydrolysisEsterase enzymesPolymer chemistryHumansCamptothecin (CPT)Molecular capSize reductionsTherapeutic ApplicationEthylene glycolTwo-step procedureEsterificationSuspensions (fluids)Ruthenium compoundsQUIMICA INORGANICAMesoporous supportOligo(ethylene glycol)Cell internalizationMolecular gatesConfocal microscopychemistryEnzymatic hydrolysisEnzyme-mediated hydrolysisNanoparticlesCamptothecinCell cultureMesoporous materialAqueous suspensionsEthylene glycolHeLa Cells
researchProduct

On the moving loads problem in discontinuous homogeneous beams and layered beams with interlayer slip

This manuscript contains the main part of my research performed in this last triennium at the Department of Civil, Environmental, Aerospace and Materials Engineering, University of Palermo, and at the Department of Basic Sciences in Engineering Sciences (Unit of Applied Mechanics), University of Innsbruck, Austria. The research adheres to a common procedure of solving a scientistic problem. That is, introduction to the problem, selection of the mathematical and physical tools to model the problem, proposed solution, and numerical validation. The thesis proposes a novel modal superposition approach to the moving loads problem on discontinuous homogeneous beam and layered beam with interlayer…

Discontinuous beams layered beams translational supports rotational joints tuned mass dampersSettore ICAR/08 - Scienza Delle Costruzioni
researchProduct

Cluster Preface: Heterogeneous Catalysis

2016

International audience; Jean-Cyrille Hierso is full professor of Chemistry since 2009, heading the group of ‘Organometallic Chemistry and Catalysis’ at the Institute of Molecular Chemistry at the University of Bourgogne Franche-Comté (UBFC). He has interest in the fields of organometallic chemistry, ligand design, homo- and heterogeneous catalysis, chemical physics, and material sciences. In 2011 he was awarded the National Prize for Coordination Chemistry from the French Chemical Society (SCF), and at the end of 2012 he was elected a junior Member of the French Professors Academy ‘Institut Universitaire de France’ (IUF).Yasuhiro Uozumi is a full professor at the Institute for Molecular Sci…

Green chemistryMolecular chemistry010405 organic chemistryOrganic ChemistryLibrary scienceNanotechnology010402 general chemistryHeterogeneous catalysis01 natural sciencesMolecular science[ CHIM ] Chemical Sciences0104 chemical sciencesChemical societychemistry.chemical_compoundsustainable chemistry - nanocatalysts - organocatalysts - gold - palladium - nanoparticles - peptides - polymer supports - inorganic supports - nanotubes - epoxidation - esterification - cross-coupling - C–H functionalization - oxidation - (hetero)arenes - Kinetics - supramolecular assembly - recovery - recyclingchemistryTeam leader[CHIM]Chemical SciencesOrganometallic chemistry
researchProduct

Visibilidad y usabilidad de la literatura profesional en DoIS (Documents in Information Science)

2004

The fundamental aspect born with the generalization of information networks has been the phenomenon of the tooinformation, the availability of a great number of resources means that the people, whom deposit their documents in the network, establish appropriate mechanisms so the information is accessible and recovered. Over the last years in Library and Information Science, several LIS professionals work in DoIS, Documents in Information Science. The DoIS team has been working the visibility and usability of the site, to fulfill the objective to spread the service within the community of librarians and archivists.

H. Information sources supports channels.
researchProduct

Els manuscrits medievals : entre l'encís i la veneració

1998

In our cities samples and exhibitions have been seen that show to tthe citizens the obtained progresses of the last years and with assiduity, in them, some manuscripts are presents. A considerable part of the public admires them and contemplates astonished; and to others nor it interests to them.

H. Information sources supports channels.
researchProduct

The Pyridyl Functional Groups Guide the Formation of Pd Nanoparticles Inside A Porous Poly(4-Vinyl-Pyridine)

2015

The reactivity of palladium acetate inside a poly(4-vinylpyridine-co-divinylbenzene) polymer is strongly influenced by the establishment of interaction between the Pd precursor and the pyridyl functional group in the polymer. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and simultaneous X-ray absorption near edge structure (XANES) and small angle X-ray scattering (SAXS) techniques have been applied to monitor the reactivity of palladium acetate in the presence of H-2 and CO as a function of temperature. H-2 reduces palladium acetate to Pd nanoparticles and acetic acid. The pyridyl groups in the polymer play a vital role both in stabilizing the formed acetic acid, thu…

INFRARED-SPECTRADiffuse reflectance infrared fourier transformpolymersmall angle X-ray scatteringInfrared spectroscopychemistry.chemical_elementPALLADIUM(II) ACETATEIR spectroscopy; nanoparticles; palladium; polymers; small angle X-ray scattering; X-ray absorption spectroscopyPhotochemistryCatalysisCatalysisInorganic ChemistryAcetic acidchemistry.chemical_compoundRUTHENIUM NANOPARTICLESPARTICLE FORMATIONENVIRONMENTALLY BENIGNReactivity (chemistry)Physical and Theoretical ChemistryCARBON-MONOXIDEpolymerschemistry.chemical_classificationPOLYMERIC SUPPORTSnanoparticleIN-SITUOrganic ChemistryIR spectroscopy; nanoparticles; palladium; polymers; small angle X-ray scattering; X-ray absorption spectroscopy; Inorganic Chemistry; Organic Chemistry; Physical and Theoretical Chemistry; CatalysisX-ray absorption spectroscopyPolymerpalladiumchemistryIR spectroscopynanoparticlesPalladium(II) acetateTRANSITION-METAL COORDINATIONRESOLVED SAXS ANALYSISPalladium
researchProduct

Nanoparticles of AlTiZr mixed oxides as support of hydrodesulfurizaton catalysts: Synthesis and characterisation

2012

Abstract TiAlZr mixed oxides, synthesized using sol–gel method, were characterized and used as supports of hydrodesulfurization catalysts (12 wt% Mo) prepared by impregnation either with molybdenum heteropolyacid H3PMo12O40 or its cobalt salt Co1.5PMo12O40. Structure, morphology and textural properties of oxides and catalysts were characterized using X-ray powder diffraction (XRD), Raman spectroscopy, Nitrogen adsorption porosimetry, TEM-EDS, temperature-programmed desorption (TPD) and temperature-programmed reduction (TPR) techniques. Activity of the catalytic systems was tested in thiophene hydrodesulfurization (HDS). No formation of a new oxide phase was revealed in the synthesized mixed…

Materials scienceMechanical EngineeringInorganic chemistryMetals and AlloysOxidechemistry.chemical_elementCatalysisMixed oxides supports Sol–gel process Co-Mo-P-catalysts Thiophene hydrodesulfurizationchemistry.chemical_compoundchemistryMechanics of MaterialsMolybdenumDesorptionMaterials ChemistryThiopheneCobaltHydrodesulfurizationSol-gelSettore CHIM/02 - Chimica Fisica
researchProduct

On the moving load problem in Euler–Bernoulli uniform beams with viscoelastic supports and joints

2016

This paper concerns the vibration response under moving loads of Euler–Bernoulli uniform beams with translational supports and rotational joints, featuring Kelvin–Voigt viscoelastic behaviour. Using the theory of generalized functions to handle the discontinuities of the response variables at the support/joint locations, exact beam modes are obtained from a characteristic equation built as determinant of a (Formula presented.) matrix, for any number of supports/joints. Based on pertinent orthogonality conditions for the deflection modes, the response under moving loads is built in the time domain by modal superposition. Remarkably, all response variables are built in a closed analytical for…

Modal superpositionViscoelastic behaviourCharacteristic equationComputational Mechanics02 engineering and technologyClassification of discontinuities01 natural sciencesVibration responseOrthogonality conditionsymbols.namesakeBernoulli's principle0203 mechanical engineeringDeflection (engineering)0103 physical sciencesViscoelastic supports010301 acousticsMathematicsGeneralized functionMechanical EngineeringMathematical analysisCharacteristic equationMoving loadAnalytical formGeneralized function020303 mechanical engineering & transportsEuler's formulasymbolsBeam (structure)Acta Mechanica
researchProduct

Encapsulation of folic acid in different silica porous supports: A comparative study.

2016

Although folic acid is essential to numerous bodily functions, recent research indicates that a massive exposition to the vitamin could be a double-edged sword. In this study, the capacity of different caped mesoporous silica particles (i.e. Hollow Silica Shells, MCM-41, SBA-15 and UVM-7) to dose FA during its passage through the gastrointestinal tract has been evaluated. Results confirmed that the four capped materials were capable to hinder the delivery of FA at low pH (i.e. stomach) as well as able to deliver great amounts of the vitamin at neutral pH (i.e. intestine). Nevertheless, the encapsulation efficiency and the deliver kinetics differed among supports. While supports with large p…

OptimizationVitaminPorous silica supportsSmart deliveryINGENIERIA DE LA CONSTRUCCIONFolic acidTECNOLOGIA DE ALIMENTOSSilicon dioxideKinetics02 engineering and technology010402 general chemistryElectron Microscopy Service of the UPV01 natural sciencesAnalytical Chemistrychemistry.chemical_compoundQUIMICA ORGANICAFolic AcidNeutral phPorosityNutritionChemistryQUIMICA INORGANICAGeneral MedicineMesoporous silica021001 nanoscience & nanotechnologySilicon Dioxide0104 chemical sciencesLarge poreNutrition AssessmentBiochemistryChemical engineeringFolic acid0210 nano-technologyPorosityFood ScienceFood chemistry
researchProduct

Non-Linear Hysteretic Instability in Rotating Machinery

2013

The destabilizing influence of the shaft hysteresis on the supercritical whirl of rotating machines can be efficiently counterbalanced by proper external dissipative sources in the supports and/or anisotropic suspension systems. The hysteretic effect may be treated either by dry or viscous models obtaining different but somehow similar results in the hypothesis of small dissipation levels. Thus the linear viscous assumption is often accepted as a crude approximation for a straightforward analysis of the whirling instability. Nevertheless the internal friction should be regarded most likely as non-linear and could be approximated for example by Coulombian models taking thus into account also the releasing effect of some shrink-fit coupling present in the mechanical assembly.
researchProduct